Maretron Pressure Transducer 0 to 50 PSI [PT-0-50PSI-01]

SKU: CWR-64725

VENDOR: Maretron

$149.00$148.95

You Save: $0.05 (1%)

PRODUCT INFORMATION
PRODUCT INFORMATION

Pressure Transducer 0 to 50 PSI

All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.


WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

This is a standard cookie notice which you can easily adapt or disable as you like in the admin. We use cookies to ensure that we give you the best experience on our website.

Maretron Pressure Transducer 0 to 50 PSI [PT-0-50PSI-01]

Maretron Pressure Transducer 0 to 50 PSI [PT-0-50PSI-01]

$149.00$148.95
Pre-loader